• Turn off the removable drive by pressing and holding the blue button for 1-2 seconds until you hear the drive start to turn off and the blue light will start to blink and then turn off

Press the left side of the drive, like below, to “unlock” the drive from the system

Pull the removable drive out.

Insert a different removable drive into the server, exactly where you removed the other one.  It can only be inserted one way, so if it will go not in the whole way, flip it over and try again.

Push the drive in almost the whole way, then push it in the whole way by press on the black lever like the picture below.  You should hear it click and that confirms the drive is secure in the enclosure.

Press the blue button to turn on the drive.  You should then see the blue light come on and that confirms the drive inserted properly and the system should now see the drive.

Place the drive that you removed from the server into the heavy duty carrying case to take offsite for disaster recovery purposes.